Klarstein SPARK ICE Bedienungsanleitung Seite 24

EN
22
TROUBLESHOOTING
PROBLEM
"Add water" indicator
light is on.
Ice cubes are sticking
together.
The ice making
process is normal,
but no ice is
formed.
POSSIBLE CAUSE
Lack of Water.
The anti-blocking cover
is blocked.
The ice making cycle
time is too long.
The evaporator is too
much immersed in the
ice box.
The water temperature
in the tank is too low.
Ambient temperature or
water temperature is
too high.
Leak in the refrigeration
system.
Clogged refrigeration
system
SOLUTION
Add water to remake ice.
Clean.
Stop making ice. After
the ice cubes have
melted, restart the ice
making process and
select Small Ice.
Adjust the evaporator.
Change the water in
the tank. The water
temperature should be
between 8 °C and 32 °C.
Please make ice
when the ambient
temperature is lower
than 32°C and add a
certain amount of cold
water to the water tank.
Contact after-sales
service.
Contact after-sales
service.