AEG A82630GNW3 Benutzerinformation Seite 35

CAUTION!
To carry out the following
operations, we suggest that
this be made with another
person that will keep a firm
hold on the doors of the
appliance during the
operations.
1. Remove the ventilation grille.
Remove the upper filling and install it
on the opposite side of the grille.
2. Remove the pedal hole cover and
install the cover provided in the
accessory bag on the opposite side.
3. Lay down the appliance back side
down on a wooden support.
4. Unscrew the hinge (1).
5. Remove the cover (2) and install the
hinge on the opposite side. Install
the cover on the opposite side.
1
2
6. Unscrew the cable holder (1).
Remove the cable from its position
(2).
7. Unscrew the lower hinge (3) and pull
the cable out from the door (4).
Unscrew and move the pedal (5) to
the opposite side.
5
8. Unscrew the cover (1, 2), remove the
cable from its position (3).
2
9. Push the cable with bushing into
position on the other side (1) and
screw on the cover (2, 3).
1
10. Screw on the lower hinge (1, 2), screw
on the cable holder (3, 4).
ENGLISH 35
1
3
2
4
3
1
2
3