Control Panel Functions - Lionelo Rina Bedienungsanleitung

Note! The batteries and the power adapter must not be used at the same time.
Note! While using the product, always use the safety belts (fig. 6).
1. Backrest inclination angle adjustment
To adjust the backrest inclination angle, press and hold buttons on both sides of the frame of the
infant swing, and then set the chair in a desired position – lying (A, fig. 4) or half-sitting (B, fig. 4).
2. Rocking feature
To use the rocking feature, slide down the slider located at the back of the base of the
infant swing (fig. 5). To lock the rocking feature, slide it up.
Seat rotation
The seat can be rotated 360° in any direction. Hold the support of the product and then
turn the seat in the desired direction. The position stops every 45°, which is indicated by
a characteristic click.

Control panel functions

To use the infant swing feature, turn the product on (1, fig. D).
1. Rocking
Set the rocking speed through key 2, 3 (fig. D).
When rocking is active, you can:
•
activate the automatic motion detection mode: press the key 4 once (fig. D).
•
deactivate rocking: press the key 4 twice (fig. D) (when you want to keep the music on,
not turning the entire product off)
The automatic motion detection mode: the infant swing can detect the child's movements
and activate rocking on its own.
2. Melodies
To play the melody, press the play melody key (6, fig. D)
When the melody is playing, you can:
•
press the key 6 (fig. D) to stop it,
•
press the key 6 (fig. D) twice to play the next track,
•
hold the key and release to change the volume.
3. Time setting
Press the key 5 (fig. D) and select the time. When the time is up, the infant swing's functions
will be deactivated.
Troubleshooting
Problem
Music stops playing, and rocking is
suspended
Solution
Batteries are worn-out or incorrectly inserted.
Exchange the batteries with new or check if
the position of terminals is correct (+ -).
‑ 9 ‑ EN