Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 15
The infant swing can be powered through 4 AA LR6 batteries or a power adapter. The
batteries and the power adapter are not included in the set.

Power supply

1. Connect the USB cable to the power adapter, and then plug the power adapter in the
electric socket. Put the other end of the cable in a DC port located at the base of the
infant swing (fig. A).
2. Regularly check the power adapter for potential damage to the cable, plug, contacts
and other pieces. In case of any irregularities, stop using the power adapter.
3. Please make sure the power adapter complies with the following parameters: 6V DC 1 A.
Batteries
1. Keep the batteries out of reach of children.
2. When putting the batteries into the holder, pay attention to terminals.
3. Do not throw the batteries into the fire as they may explode.
4. If you do not use the product for a long time, remove the batteries from the holder.
5. Always remove a dead battery. If you keep it inside the product, it may leak or explode
and destroy the product.
6. The batteries are non-rechargeable and must not be recharged.
7. Do not mix various batteries or old (worn-out) with new batteries.
8. Do not short circuit battery contacts.
9. Dispose of the batteries in accordance with law; throw them into special containers.
10. Warning! The remote control has button cell batteries which may cause serious internal
chemical burning in case they are swallowed.
11. Warning! The worn-out button cells must be disposed of immediately. Keep new and
worn-out batteries out of reach of children. In case you suspect the batteries have
been swallowed or otherwise placed in any body part, instantly seek medical assistance.
How to install the battery (fig. B)
1. Remove the battery holder cover by unscrewing it with a screwdriver.
2. Place the battery inside the holder, pay attention to battery terminals.
3. Put the holder cover back on and tighten the screw up.
Description of parts (fig. C)
A. Aluminum feet
B. Base of the infant swing
C. Support of the infant swing
D. Seat inclination adjustment key
E. Frame of the infant swing
F. Shank
‑ 7 ‑
EN
Inhaltsverzeichnis
loading

Inhaltsverzeichnis