B-G Instruments BGR304 Benutzerhandbuch Seite 5

OPERATION
OPERATION
BUTTON FUNCTIONS
Button
Normal
When pressed once will turn the
POWER
unit ON/OFF.
ZERO When pressed, the current reading
is set to zero, subsequent
measurements
reading. The LCD will show the
A icon to indicate
zero mode.
Press and hold for 3 seconds
enable or disable
icon will be displayed on the LCD.
The alarm can be set to a different
accuracy within the menu if required
HOLD When pressed the current value
will freeze, the
to indicate the reading is on hold.
SET When pressed and held for 2
seconds will enter
BATTERY CHARGING
The unit has a built in Lithium Ion rechargeable battery.
A standard USB cable is supplied.
I. Plug the USB cable into the Digital Dual Angle Axis Gauge.
2. Plug the other end of the cable into the USB port of a computer or into a mains charger.
Function Descriptions
Mode MENU
Serves
escape key on
2nd level
Serves
upward key for
are relative to this option selection
the device is in
to
sound. The
Serves
downward key
o icon will flash
for option
selection
Serves
the menu mode.
select/set key
ARBEITSWEISE
OPERAZIONE
LCD ICON
Mode
as the
o
menu
as the
as the
as the
öo.öl
00.84'
OPERACIÖN
REPRESENTATIONS
Battery status indication icons.
These icons indicate the battery
level. There are 3 levels
re resentin em
In dual-axis mode, the LCD
displays the direction
using an E-bubble graphic.
Degree mode. Flashes when unit
is in HOLD mode.
Alarm icon, Shows when the alarm
is set.
When this logo is shown the unit is
in zero mode
being displayed. Press the ZERO
button to reset
Direction of tilt icon, shows the tilt
angle direction.
Dual-axis mode.
angles will be shown. Dual axis
mode measures inclination up to
+/- 40 degree for each axis before
it automatically
axis measuring mode.
Single-axis mode. Measures slope up
to +1-90 degrees
half and full.
of tilt
and a relative value is
the current a le.
Both X and Y axis
switches to single