Max PowerLite AKHL1230E Originalbenutzerhandbuch
Vorschau ausblenden
Andere Handbücher für PowerLite AKHL1230E:
- Benutzerhandbuch (26 Seiten) ,
- Originalbenutzerhandbuch (26 Seiten)
Inhaltsverzeichnis
Quicklinks
AKHL1230E(CE)
HIGH PRESSURE COMPRESSOR
HOCHDRUCK-KOMPRESSOR
COMPRESSEUR À HAUTE PRESSION
COMPRESSORE AD ALTA PRESSIONE
COMPRESOR DE ALTA PRESIÓN
MANUAL DELw USUARIO ORIGINAL
BEFORE USING THIS COMPRESSOR, STUDY THIS MANUAL TO ENSURE SAFETY WARNING
AND INSTRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING
LESEN SIE VOR INBETRIEBNAHME DES GERÄTES DIE GEBRAUCHS- UND
SICHERHEITSHINWEISE.
BEWAHREN SIE DIESE GEBRAUCHS- UND SICHERHEITSHINWEISE FÜR EINE SPÄTERE
EINSICHTNAHME AUF.
WARNUNG
AVANT D'UTILISER CE COMPRESSEUR, LIRE CE MANUEL ET LES CONSIGNES DE
SÉCURITÉ AFIN DE GARANTIR UN FONCTIONNEMENT SÛR.
CONSERVER CE MANUEL EN LIEU SÛR AVEC L'OUTIL AFIN DE POUVOIR LE CONSULTER
ULTERIEUREMENT.
AVERTISSEMENT
PRIMA DI UTILIZZARE QUESTO COMPRESSORE, STUDIARE IL MANUALE PER
APPRENDERNE LE AVVERTENZE E LE ISTRUZIONI DI SICUREZZA.
TENERE QUESTE ISTRUZIONI INSIEME AL COMPRESSORE PER CONSULTAZIONI FUTURE.
ATTENZIONE
ANTES DE UTILIZAR ESTE COMPRESOR, LEA DETENIDAMENTE LAS INSTRUCCIONES Y
ADVERTENCIAS DE SEGURIDAD.
GUARDE ESTAS INSTRUCCIONES CON LA HERRAMIENTA PARA UNA POSIBLE
CONSULTA FUTURA.
ADVERTENCIA
ORIGINAL USER MANUAL
ORIGINAL-BENUTZERHANDBUCH
MANUEL D'UTILISATION D'ORIGINE
MANUALE UTENTE ORIGINALE
Original instructions
Inhaltsverzeichnis
Verwandte Anleitungen für Max PowerLite AKHL1230E
Inhaltszusammenfassung für Max PowerLite AKHL1230E
- Seite 1 AKHL1230E(CE) HIGH PRESSURE COMPRESSOR HOCHDRUCK-KOMPRESSOR COMPRESSEUR À HAUTE PRESSION COMPRESSORE AD ALTA PRESSIONE COMPRESOR DE ALTA PRESIÓN ORIGINAL USER MANUAL ORIGINAL-BENUTZERHANDBUCH MANUEL D'UTILISATION D'ORIGINE MANUALE UTENTE ORIGINALE MANUAL DELw USUARIO ORIGINAL Original instructions BEFORE USING THIS COMPRESSOR, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND INSTRUCTIONS.
- Seite 2 Ανατρέξτε στο CD-ROM ή στην τοποθεσία Web. TÜRKÇE CD-ROM veya Web sitesine bakınız. РУССКИЙ См. на компакт-диске или на веб-сайте. www.max-ltd.co.jp/int/eu/ DEFINITIONS OF SIGNAL WORDS WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Seite 3: Inhaltsverzeichnis
ENGLISH OPERATING and MAINTENANCE MANUAL INDEX 1. SAFETY INSTRUCTIONS ..........4 2. SPECIFICATIONS AND TECHNICAL DATA ....9 3. INSTRUCTIONS FOR OPERATION ........ 10 4. PROTECTIVE DEVICE............. 20 5. ABNORMALITIES DURING OPERATION....... 21 6. BUZZER TYPES............... 22 7. AUTOMATIC ADJUSTMENT OF OPERATING POWER (INVERTER CONTROL)........... -
Seite 4: Safety Instructions
SURE AIR. FOR USAGE OF HIGH PRESSURE AIR, HIGH PRESSURE COMPRESSOR IS DE- 1. SAFETY INSTRUCTIONS SIGNED ONLY FOR MAX POWERLITE NAILERS AND POWERLITE HOSE. UNSPECIFIED USAGE WILL CAUSE SERIOUS ACCIDENTS. WARNING 1. - Seite 5 Keep out of reach of chil- an exclusive extension cord. dren. Lock-out the storage area. Tab.1 SECTION VALID FOR A MAX LENGTH 8. KEEP WORK AREA CLEAN OF 20m (65') Cluttered areas invite injuries. Clear all work...
- Seite 6 17. KEEP ALL SCREWS, BOLTS AND COV- ERS TIGHTLY IN PLACE Keep all screws, bolts, and plates tightly mounted. WARNING Check their conditions periodically. Avoid electrical shock hazard. Never use this 18. KEEP MOTOR AIR VENT CLEAN compressor with a damaged or frayed electrical The motor air vent must be kept clean so that cord or extension cord.
-
Seite 7: Replacement Parts
29. WHENEVER USING THE HIGH PRESSURE SIDE OF THE MAX POWERLITE COMPRES- SOR, THE GENUINE PARTS FOR THE MAX POWERLITE TOOLS, POWERLITE HOSE AND COMPRESSOR MUST BE USED. 30. REPLACEMENT PARTS When servicing, use only MAX genuine parts. -
Seite 8: Never Connect The Compressor To An Engine Generator Or Di- Rect-Current Power Supply
36. BE SURE TO EARTH THE COMPRESSOR Earth the compressor to prevent a worker from getting an electric shock. It comes with a 3-pole cord and a 3-pole earthing plug so that it can be connected to an appropriate earthing plug socket. A green-and-yellow striped wire is an earth- ing conductor. -
Seite 9: Specifications And Technical Data
2. SPECIFICATIONS AND TECHNICAL DATA 1. SPECIFICATIONS Product No. AKHL1230E (CE) 230V±10% 50Hz±1% φ1 Power supply Rated current Motor power Protective earthing Class I Protective structure IP20 Working temperature 0°C to +40°C Working humidity 85 % RH or less. No dew condensation. Height above sea level Up to 1,000 m Storage temperature... -
Seite 10: Instructions For Operation
3. INSTRUCTIONS FOR OP- 1. INSTALLATION ERATION Unpack the compressor and check for any defi- ciency, damage caused during transportation Thinner Gasoline and loose bolts and screws. WARNING READ SECTION TITLED " SAFETY INSTRUC- WARNING TIONS " WEAR SAFETY GLASSES OR GOGGLES 1. - Seite 11 WARNING WARNING 4. AVOIDING A PLACE EXPOSED TO HIGH 7. NEVER INSTALL THE MACHINE IN THE TEMPERATURE OR THE DIRECT SUN- RAIN OR IN A PLACE SPLASHED WITH SHINE, BE SURE TO USE THE MACHINE WATER OR EXPOSED TO HIGH TEMPER- IN THE WELL-VENTILATED SHADE.
- Seite 12 WARNING 9. NEVER SIT OR PLACE AN OBJECT ON THE TOP OF THE MACHINE. Neglect of this could cause a trouble or break it. WARNING Do not use the compressor in any place where the temperature is 0°C or less or the ambient temperature exceeds +40°C.
-
Seite 13: Name Of Parts
2. NAME OF PARTS Warning label Reduction valve adjustment handle (H) Control panel (Orange cap) (Front panel) Pressure-reduction High pressure air chuck (for valve adjustment handle tools) (L) (Yellow cap) Drain cock Power cord Pressure gauge for indicating the set reduction valve pressure (2 gauges) Multilingual explanation Power plug... -
Seite 14: Power Switch
(2 (H) and (L). gauges) (24.5 bar maximum on the H side and 8.3 bar maximum on the L side.) High pressure air chuck (for MAX It connects the MAX air hose for the tools. tools) General-purpose air chuck (for reg- It connects the air hose for the general-pressure nailers. -
Seite 15: Normal Mode
Operating mode Pressure control range Application example ON pressure OFF pressure NORMAL MODE 25 bar 29 bar Joinery work by MAX tools, general-purpose nailers, etc. HIGH POWER 30 bar 34 bar Continuous surface fastening and the MODE like with MAX tools. - Seite 16 3. MACHINE OPERATING PROCE- DURE Inspection and checkup prior to oper- ation 2. Turn the power switch on while maintain- WARNING ing the drain cock fully open. The buzzer • Prior to use, check the bolts and nuts for sounds with a beep at the same time. loosening and the parts for missing one.
- Seite 17 8. Discharge the compressed air by open- ing the drain cock somewhat. Make sure that the operation is resumed due to a de- crease in the pressure. CAUTION • As the pressure in the air tank increases due to the pressure characteristic of the pressure-reduction valve, the pressure can vary from the set supply pressure by as much as 2 bar.
-
Seite 18: Operating Procedure
(Due to Characteris- tics of pressure-reduction valve respectively) • 2 pressure-reduction valves provided on this machine allow you to connect MAX and the general-purpose nailer or pneumatic tool. 1. Fully open the drain cock and turn the <Pressure-reduction valve H>... - Seite 19 (air chuck). 4. Connect the high pressure hose to the high pressure air hose for MAX PowerLite tools to the high pressure air chuck on the H side of the pressure-reduction valve.
-
Seite 20: Protective Device
4. PROTECTIVE DEVICE If internal heat builds up during operation due to clogging of the airflow orifice, if the machine is WARNING used in a highly heated environment or if an ab- normality occurs inside the machine, the thermal 3. If the protective device was activated protector for preventing burnout may be activat- when there were no apparent problems ed to stop the motor operation. -
Seite 21: Abnormalities During Operation
5. ABNORMALITIES DURING OPERATION WARNING • If you detect any abnormalities, do not op- erate the compressor. If you encounter any of the following abnormal phenomena, turn off the power switch immedi- ately, disconnect the power plug from the outlet and send the machine to your dealer or author- ized service facility for checkups or repairs. -
Seite 22: Buzzer Types
6. BUZZER TYPES In normal operation Buzzer sounds Symptom Actions taken At powering on A one-time short beep sound (Pi) When the operating mode is switched In cases of abnormal operation TEMPERATURE OR Buzzer sounds ELECTRICAL PROB- Cause Actions taken LEM LED ( LED) None... -
Seite 23: Automatic Adjustment Of Operating Power (In- Verter Control)
7. AUTOMATIC ADJUSTMENT 8. IN ORDER TO MAINTAIN OF OPERATING POWER (IN- PERFORMANCE VERTER CONTROL) Microcomputer-based inverter control is enabled on this machine in order to ensure the maximum utilization of the discharging performance. Ad- justment of the operating power is automatically continued until the pressure in the machine tank reaches the maximum level being set for the cur- rently set mode. - Seite 24 3. Implement the machine inspection on a regular basis. The User is requested to implement cleaning and inspection of the machine in order to maintain its performance. Please do not hes- itate to let your dealer or authorized service facility inspect your machine. 4.
- Seite 25 :1848, Kawai, Tamamura-machi, Sawa-gun, Gunma, 370-1117 Japan Gunma, 370-1117 Japan Questo prodotto è stato valutato per la conformità con le succitate direttive, secondo i Authorised complier :MAX.EUROPE BV/President in the community seguenti standard europei. Camerastraat 19,1322 BB Almere, The Netherlands Direttiva Macchine...
- Seite 26 OSTSTRASSE 22, 40211 Camerastraat 19 DÜSSELDORF, GERMANY 1322 BB Almere The Netherlands TEL: +49-211-9365300 Phone: +31-36-546-9699 FAX: +49-211-93653017 FAX: +31-36-536-3985 www.max-ltd.co.jp/int/ (GLOBAL Site) www.max-europe.com (EUROPE Site) 4007908 110303-00/01 PRINTED IN JAPAN GEDRUCKT IN JAPAN IMPRIMÉ AU JAPON STAMPATO IN GIAPPONE...