2
Installation of the telephone
2.1
Connection of the handset connecting cord
Connect the handset cord as shown in Figure 1. Lay the handset cord in the cord groove
and lock it below the two cord retainers.
ISDN telephone seen from the bottom
Jack for connecting
the handset
Fig. 1
2.2
Connection of the ISDN connecting cord
Connect the ISDN cord as shown in Figure 2. Then lay the ISDN cord in the cord groove
and lock it below the two cord retainers. Ensure that the longer ISDN connector is plug-
ged into the ISDN jack and the shorter ISDN connector into the ISDN jack on the tele-
phone.
Telephone seen from the bottom
ISDN connector
(short)
Jack for ISDN connecting cord
Fig. 2
Handset
Handset connector
Cord holder
Handset jack
Handset cord
ISDN connectorr
(long)
Cord holder
21