Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ADDITIONAL SAFETY
INSTRUCTIONS FOR YOUR
BLADE RUNNER
1. SAFETY PRECAUTION
1) Do not use saw blades which are damaged or
deformed;
2) Replace the table insert when worn;
3) Connect blade runner to a dust-collecting device
when sawing wood;
4) Take care that the selection of the saw blade and
the speed depends on the material to be cut;
5) Do not clean the saw blade whilst it is in motion;
6) Wear suitable personal protective equipment,
when necessary, this could include:
–
Hearing protection to reduce the risk of induced
hearing loss;
–
Respiratory protection to reduce the risk of
inhalation of harmful dust;
–
Gloves for handling the saw blade and rough
material.
2. SAFE OPERATION
1) During transportation the saw blade guard
should be locked at fully down (close to the table)
position;
2) Do not use guard and its support system for
handling or transportation;
3) When cutting round timber use a suitable holding
device to prevent twisting of the workpiece;
10
4) Any time after cutting, the knob for locking blade
guard shall be released so that the guard is fully
down to the table.
SYMBOLS
To reduce the risk of injury, user must
read instruction manual
Double insulation
Wear ear protection
Wear eye protection
Wear dust mask
BladeRunner
X2
®
Warning: do not expose to rain or use
in damp locations
Warning
Before any work on the machine itself,
pull the power plug from the outlet
Wear protective gloves
Wood
Aluminium
Metal
Plastic
Ceramic tile
Teeth per inch
Incorrect
Correct
Lock
EN
Werbung
