Airwell RWV11 Bedienungs- Und Installationsanleitung Seite 26

Operation
VIP
( Only valid for part of models)
(1) Setting method:
In the state of off , when the backlight is lit up, long press key for 10 seconds to enter
VIP function.
The timing display area displays whether there is a VIP in the system. 00 means none, 01
means yes, and the value is still displayed, indicating that it cannot be changed;
In the middle area displays the local VIP parameters, 00 represents the local non VIP and
01 represents the local VIP. Flashes if changes are allowed; If it cannot be changed, the dis-
play will be still.
Pressing or key to switch the parameters, and pressing the MODE key to confirm.
(2) In the Timer display area, 1 means the local VIP is turned on, and 0 means the local VIP
is turned off;
(3) If VIP is not set in the outdoor unit system, any wired controller of indoor unit can be set
with VIP function; if the outdoor unit system has set VIP function, only the VIP machine can
be set up VIP on or off.
(4) After setting VIP function, if the indoor unit is sated VIP function, the main interface will
display the characters "VIP"; if it is a non-VIP indoor unit , and when the mode of indoor unit
is different from the VIP indoor unit , the controller will display the "Mode conflict" icon .
(5) When switching between VIP and non-VIP, you need to exit the current Settings and
enter again.
23