Airwell RWV11 Bedienungs- Und Installationsanleitung Seite 19

Operation
Health airflow up/down function (only valid for part of models)
(1) Press MENU key, you will enter function circulation, use or key to switch
between different functions. Switch to (health airflow up) or (health airflow down)
function, then press MODE key to set the function. When the function is successfully set, the
corresponding icon will be displayed on the main interface.
(2) Health airflow up/down function cannot be set at the same time. When the latter function
is set, the former will be automatically canceled.
(3) When health airflow up/down function is set, if you adjust the swing angle, the health air-
flow up/ down function will be canceled.
10°C heating(Valid only in heating mode)
(1) Only in heating mode, this function is valid in function circulation.
(2) Press MENU key, you will enter function circulation, use or key to switch be-
tween different functions. When it switches to the 10°C heating function, 10°C will flash in
the temperature display area. Press MODE key to confirm.
(3) In the state of the 10°C heating function, when you switch to the 10°C heating function in
the function circulation, pressing MODE key to turn it off.
(4) In the state of 10°C heating function, if you change modes or adjust temperature set-
point, you will exit the 10°C heating function
16