Airwell RWV11 Bedienungs- Und Installationsanleitung Seite 23

Operation
Static Pressure (only valid for part of models)
(1) When the controller is turned on, press FAN and MODE keys for 5 seconds to enter stat-
ic pressure interface. The parameter of static pressure is displayed in the middle area. And
you can use or key to adjust it. After adjustment, you need press MODE key to
confirm changes. The unit number is displayed in the left part of the timer.
(2) The slave controller cannot set the static pressure function.
Low temperature dehumidification
(1) Long press MENU and keys for 5 seconds to enter advanced settings. The unit
number is displayed in the lower right corner. Parameter is displayed in the upper right cor-
ner. Middle area displays function code. Press or key to switch to A38, and then
press MODE key to enter parameter adjustment, use or key to adjust parameter
to 1(turn on low temperature dehumidification), then press MODE key to confirm change. At
this time, you can exit the advanced settings by no operation.
(2) After the low temperature dehumidification function is turned on, the range of setting tem-
perature in dry mode is 10°C~30°C.
(3) If you want to cancel this function, please change the parameter of A38 to 0, then the
range of setting temperature in dry mode is 16°C~30°C.
20