Wireless Mode; Warranty - Glareone Flash Rc Gebrauchsanleitung

Wireless mode

Press and hold the Group button to enter wire-
less mode settings. You can choose between
four options:
0 Flash Control: group setting is turned off,
all lights assigned to the given channel will
work in one group.
1 Flash Control: group setting is active, you
can control each group separately in a given
channel
2 Continuous light: you can adjust the light
brightness of lights in a chosen channel, group setting is turned off.
3 Continuous light: group setting is active, you can control each group
separately in a given channel.
Modes 0 and 1 are designed to be used with Vega 400 flashes.
Mode 2 is dedicated to GlareOne LED 1500 (group setting is not available).
Mode 3 is made to be used with GlareOne LED600D continuous lights.

Warranty

1. Every GlareOne product is covered by a 36 month warranty.
2. The warranty period begins when the product is purchased by its
first purchaser, which is confirmed by receipt or invoice.
3. The warranty covers damages resulting from product structural
defects or caused by errors in the production process.
4. The warranty does not cover mechanical damage or caused by use
other than its intended purpose or the operating instructions.
5. The warranty does not cover parts subject to natural wear such as
shock absorbers, bearings, halogen bulbs, etc., provided that their
wear did not result from factory defects.
6. The warranty does not cover products that have been subjected to
unauthorized changes and modifications.
7. The warranty does not cover products whose damage results from
force majeure, e.g. due to power surges, lightning, flooding, fire, etc.
EN
24