Group Selection - Glareone Flash Rc Gebrauchsanleitung

1
Press the Channel button once to activate
channel adjustment. Channel indicator
will blink.
2 By pressing +/- buttons set the channel.
3 Push the Channel button again or wait 2s
(trigger will automatically store the setting)

Group selection

>
GlareOne Flash RC allows you to wirelessly control up to 16 groups of
lights.
>
Groups allow you to divide the lights assigned to a specific channel into
smaller units.
> One or more lights can be assigned to each group.
>
Pressing + and - keys on the remote will affect only one selected group
at a time. Other lights in a given channel will not change their operating
parameters.
>
If more than one light is assigned to a group, they will be recognized by
the trigger as one light source.
1
Press the Group button once to activate
group adjustment. Group indicator will
blink.
2
By pressing +/- buttons choose the group
you want to control
3
Push the Group button once more to con-
firm or wait 2s - the trigger will automatical-
ly confirm the selected group.
21
EN