Sync Speed; Modeling Light Control; Sound Signal - Glareone Flash Rc Gebrauchsanleitung

Sync speed

GlareOne Flash RC trigger can be used to wirelessly synchronize flash
with the camera shutter. However it will work flawlessly only up to the
x-sync speed level. In the case of most cameras, the x-sync time is 1/250s
or 1/160s*. If this shutter time is exceeded, part of the photo will be un-
derexposed or the frame may be partially or completely black. This is not
a defect of the flash or trigger and it results from the physical properties
of cameras equipped with a focal plane shutter (i.e. SLRs and the vast
majority of mirrorless cameras). For more information on x-sync time of
your camera, please refer to it's instruction manual.
GlareOne Flash RC is not able to perform High-Speed Sync flash.

Modeling light control

>
By pressing the Modeling Light button you can
wirelessly turn on or off modeling light of the
flash assigned to the selected group.

Sound signal

>
Press and hold the Modeling light/Sound
signal button to turn on or off the flash ready
indicator signal. When sound is off, the sound
indicator will not be shown on the trigger LCD
screen.
*
This is not applicable to some medium format cameras equipped with a central shutter
mechanism. Some Nikon and Sony cameras can go up to 1/320s.
23
EN