Attaching; Power On/Off; Channel Selection - Glareone Flash Rc Gebrauchsanleitung

Attaching

Slide the triggers hot shoe into the
corresponding camera socket. Remember
always to tighten the hot shoe locking
ring to prevent sliding out from the socket
and falling.

Power on/off

Press and hold the Test button to turn on
or off the trigger.

Channel selection

>
Trigger can be assigned to one of 32 channels.
> Currently selected channel is indicated on the LCD screen.
>
Please remember to set the same channel on the flash you want to
control remotely.
> Regardless of how many lights are used, each one of them must be
assigned into the same radio channel as the trigger which will be used
to control them.
>
If the light does not have the same radio channel set as the remote, no
control commands will be sent to it and wireless control won't work.
EN
20