SoClean 2 Benutzerhandbuch Seite 4

INDICATIONS FOR USE, CONTRAINDICATIONS,
SPECIFICATIONS, WARNINGS AND CAUTIONS
Indications for use: The SoClean 2 is a general Positive
Airway Pressure (PAP) disinfecting device and is intended
to be used in the home. An individual who uses Positive
Airway Pressure (PAP) equipment can use the SoClean 2 to
destroy 99.9% of germs and bacteria and other pathogens
on PAP equipment, or when the user wants the added
benefit of thorough PAP system disinfection.*
†
The SoClean 2 attaches to a PAP machine and runs daily
while the mask is inside the Disinfecting chamber. The
SoClean 2 does not need to be disconnected before using
your PAP machine.
Contraindications for use: Persons with underlying
lung diseases, such as asthma and chronic obstructive
pulmonary disease (also known as COPD, which includes
emphysema and chronic bronchitis), and those with
cardiovascular disease may be sensitive to ozone and
should speak to their doctor before using this product.
Read this User Manual before operating
the equipment.
Use this product only in the manner described in this User
Manual. If the equipment is used in a manner not specified
by the manufacturer, the safety protection provided by the
equipment may be impaired.
* DISCLAIMER: SoClean does not represent through the use of the terms disinfect, disinfectant or disinfection
herein, or in other documentation, a kill rate of more than 99.9% of germs and bacteria in PAP equipment.
2 | INDICATIONS FOR USE, CONTRAINDICATIONS, SPECIFICATIONS, WARNINGS AND CAUTIONS 2 |
Specifications:
Electrical characteristics:
AC adapter input: AC 100~240V, 50/60HZ, 0.5A
AC adapter output: DC 12V, 1.5A max.
Power consumption: 18W max.
Environmental characteristics:
Operating: 10°C to 38°C (50°F to 100°F),
15% to 70% humidity
Storage and transport conditions:
-20°C to +55°C (-4°F to 131°F),
15% to 70% humidity
Ozone concentration:
When operated in a 11.6 m room with 2.4
2
m-high ceilings, the average ambient ozone
concentration in the room over the operating
cycle is < 0.05 parts per million (PPM).
†
Physical characteristics:
Dimensions: 200 x 184 x 225 mm
Weight: 2.5 kg
Cord length: 142 cm
† Data on file.
WARNING: Ensure the correct clock time and cycle
start time are set on your SoClean 2 before using
your PAP machine. Pay particular attention to the
AM/PM setting if using the 12-hr mode. Failure to do
so may result in the SoClean 2 device operating at an
unexpected time.
WARNING: In the event of loss of power to your
home or the SoClean 2 device, ensure the correct
clock time and cycle start time are set on your
SoClean 2 before using your PAP machine. Failure to
do so may result in the SoClean 2 device operating at
an unexpected time.
WARNING: Do not physically alter the Hose detect
switches on your SoClean 2 device. Inspect the
Hose detect switches regularly for damage or
inability to move up/down. Failure of the Hose
detect switches on your SoClean 2 may result in the
SoClean operating at an unexpected time.
WARNING: Keep away from water sources including
rain, bathtubs, sinks and pools. To clean, wipe with a
damp cloth. Do not submerge the SoClean device in
liquid or use chemical cleaners.
WARNING: Keep away from children. Do not place
any living thing inside the Disinfecting chamber
during use.
WARNING: Do not inhale from the Injection hose or
the Injection hose outlet on the back of the device.
WARNING: Do not breathe through your PAP mask if
the SoClean is operating a disinfecting cycle.
WARNING:
Do not use a fragrant oil in the water
reservoir or highly fragrant soaps to wash the sleep
equipment when using the SoClean 2.
WARNING:
Discontinue use if acne or a rash
develops along the mask contact line and call
SoClean customer care.
WARNING: Do not use in explosive air environments,
near gas vapours or other flammables, etc. Do not
place any flammable or ignitable items on top of the
SoClean 2.
WARNING: Keep the SoClean lid closed until the
green status light illuminates (approximately two hours
after completion of the disinfecting cycle).
WARNING: Do not remove gasket from the Hose
detect switch slot.
CAUTION: The lid gasket is removable. Ensure that
the lid gasket is installed properly before operating a
disinfecting cycle.
WARNING: Do not dismantle the SoClean 2.
CAUTION: Do not place Neutralising pre-wash
in the PAP reservoir. Neutralising pre-wash is for
cleaning your PAP equipment only.
CAUTION: Please ensure that the black Injection
hose from the back of the SoClean is connected to
your PAP before operating your SoClean device.
WARNING: If a strong ozone odour is detected when
the SoClean is operating, turn the SoClean 2 off by
disconnecting the AC power adapter and inspect the
SoClean 2 for visible damage, such as cracks in the
enclosure or tubing along with tubing connections.
WARNING: Do not route your PAP hose through
both Hose detect slots while or after using your
PAP. This may result in the SoClean device running
at an unexpected time.
ENG | 3