NORAUTO MICRO START Hinweise Zur Bedienung Seite 82

ADDITIONAL FUNCTION
Charge Phone QC3.0:
Wall plug:
10% 25% 50% 75% 100%
To recharge the device,
firstly, connect the charging
output port of the provided
charger(WJG-Y131400900W)
to the product input port, and
then connect the charger plug
to the 230V power supply. At
this time, the LED will display
the charging status. After fully
charged, the LED will stop
flashing.
Wireless phone charging:
Press and hold the power
switch (6) for 3 seconds
to turn on the unit. If your
smartphone is compatible
with wireless charging
technology, simply put your
phone on the top surface of
the jump starter for quick
and easy recharging.
QC3.0
30%
80
A USB port (2) compatible with
QC3.0 fast charge technology is
available on the side of the jump
starter. Connect the USB cable
to the USB output port of the
device, press and hold the power
switch (6) for 3 seconds to turn
on the unit; the device will start
to charge. The USB output will
be automatically turned off after
charging is completed.
LED Light:
OFF
Press and hold the power
switch (6) for 3 seconds to
turn on the unit.
- 1st short press: Working
light
- 2nd short press: Flashlight,
- 3rd short press: Light Off.
2 Mins OFF:
The device will be turned
off automatically if it is not
be used within 2 minutes.
Alternatively, press and hold
the power switch (6) for 3
seconds to turn off the unit.
2MINS
OFF