Installation Of The Sim Cards; Installation Of The Microsd Card; First Use; Powering On Your Phone - RugGear RG500 Schnellstartanleitung

12
5.2_ installation of
tHe sim carDs
The phone features two SIM
card slots (1, 2). If you have
installed two SIM cards, you
can choose your primary card in
Settings SIM management.
5.3_ installation of
tHe micro-sD carD
Open the microSD card holder,
and insert the microSD card
into the slot (3), then close the
microSD card holder.
WarninG
Do not try to insert or remove any of the SIM cards when any
external power supply is connected, otherwise the SIM cards or
the phone may be damaged.

6_firSt uSE

6.1_poWerinG on your pHone

Press the Power key until the screen lights up.
Depending on the security settings of your SIM card, the phone
may ask you for your personal identification number (PIN) before
starting up.
QuickStart / firSt uSE
1
2
3
firSt uSE
The first time you power on your phone, you may be prompted
to assign a language, a date and a time zone and to enter your
personal information.
You will also be asked to sign in or set up your Google™ account.
You can do this later but please note that some of the functions
of the phone like the Google Play™ Store depend on a Google™
account.

6.2_poWerinG off your pHone

1. Press and hold the Power key to open the Phone options menu.
2. Tap Power off.
3. Tap OK.

6.3_lockinG anD unlockinG tHe pHone

Press the Power key to lock the phone. When the screen is
locked, you can still receive messages and calls.
If you leave your phone undisturbed for a while, the screen
will lock automatically.
To unlock the phone, press the Power key again. After
the screen has lit up, drag the lock icon to the unlock icon
to unlock the phone.
Depending on your security settings, the phone may ask for a PIN
to unlock. Please note that this is NOT the PIN of your SIM card, but
a code that can be assigned under System settings
Screen lock.
13
En
Security