Optika Italy C-WF Serie Bedienungsanleitung Seite 10

9. Use of camera
The camera is driven by a software.
It can be used with Windows, IOS and Android operating systems.
1. When used with Windows operating system, two levels of software are available: PROVIEW and LITEVIEW.
Inside the package is enclosed a Function Table showing the several software functions.
It will be the user's responsibility to decide which level of software best meets his needs.
The software can be downloaded from the site:
http://www.optikamicroscopes.com/optikamicroscopes/optika-support/download-drivers-softwares/
Once the file has been downloaded, you will have to run the setup.exe file.
At the end of the installation it is possible to start the software.
• NOTE: no driver installation is required for the cameras. The software setup procedure automatically installs
all the needed drivers for the correct operation of the camera.
The software's User Manual is available in PDF format within the application itself and can be opened using the "F1" func-
tion key.
You must have Acrobat Reader installed to view the manual.
The manual contains all the operating instructions for using the camera and for the various functions of the software.
2. When used with IOS or Android operating system, one App is available: Optika Mobile View.
The App can be downloaded from the App Store or Google Play Store.
① WiFi antenna
② AP/STA button
③ AP/STA LED
9.1 PC camera connection
The camera is powered via micro USB cable.
1. Connect the micro USB side of the provided cable to the micro USB camera port ⑤.
2. Connect the USB side of the provided cable to one of the USB port in your PC.
3. Launch the Proview or Liteview software.
4. Manage the camera using the software to control all function.
9.2 LAN camera connection
The camera is powered via mini USB cable.
In LAN mode, the camera connects to a router by Ethernet cable.
You can connect one or more cameras to the router by Ethernet cable for network applications.
1. Install the Proview or Liteview software on your PC. Or, install the free Optika Mobile View App on the mobile device.
2. Connect the micro USB side of the provided cable to the micro USB camera port ⑤.
①
②
④
⑤
③
⑥
④ LAN port
⑤ Micro USB port
⑥ Power LED
Page 10