Azdome M63 Besitzerhandbuch Seite 7

3.Connect the rear camera jack to the AV N port of the dash-cam. If connected properly,
front and rear camera video will be shown
Note: The front and rear camera will record simultaneously and both videos are stored
separately on the Micro SDcard.
Charging
• Please use the supplied original charger to power and USBcable to charge dash Cam.
• Do NOT Connect the camera to laptop for Charging
AZDOME dash cam has THREE different
Viedo Mode Photo Mode
To shift different mode: Press and hold
Viedo Mode
EN-IO
on the dash cam screen.
Inside the rear wind Shields
Connect live line Ofreverse light
Inside the license plate
Connect live line of reverse light
camera modes:
Playback Mode
for 2 seconds
After i nserting aSD card and power on, p ress @ once t ostop recording,
and press g once t othevideo setting.The
top right corner.
Resolution
Allow to choose the desired video resolution and fps(frames per second).
Higher resolution and FPSvideos result in smoother videos, but also take more storage
space.
Default video resolution : Front 4K and Rear 1080P, FPS Stands for "Frames Per Second."
FPSis used to measure frame rate - the number of consecutive full-screen images that
are displayed each second.
Loop Recording Off/ Imin/ 3mins(Default)/
On: Here select the length(1/3/5 min) Ofeach video clip for the loop recording.
This function allows the dash cam to continuously record. Please notice: the dash cam
will keep deleting the oldest files automatically when memory card gets full so that it
can keep recording over and over.
Off: The dash cam will a long video until the card is full then stop to record.
Time Lapse Off(Default)/ On
On: The dash cam can sustain longer operational period while reducing video file size.
Video files will be played at high-speed when playback.
Backup Cam Mirror —
This feature works only on the rear camera image.
On :The image Ofthe rear camera is as same as in the rear mirror, what on the left in
reality -> on the right of the dash cam screen;
Off: :The rear camera image is assame as what you see,what on the left in reality -> on
the left of the dash cam screen."
WDR— on/ Off(Default)
Wide Dynamic Range (WDR)processes images to ensure clear recordings in bright and
dark light. This allows the Dash Cam to combine multiple images at different levels of
brightness to create one superior image.
video i con willbeshown o nthescreen
5mins
On
EN-II