Safety Information
2.
Safety Information
Before starting to work with the device switch, read this Quick Reference Guide
and observe the instructions. Failure to observe the instructions provided, par-
ticularly those related to safety, can lead to risks to human beings, the environ-
ment, equipment and systems. The device has been produced according to
state-of-the-art technology with regard to accuracy, principles of operation and
safe operation of the equipment.
2.1
Basic Warnings
DANGER
Risk of explosion through operating electronic devices in potentially explosive
atmospheres.
Risk of fatal or severe personal injury.
► Observe the provisions and precautionary measures applicable for poten-
tially explosive atmospheres. The device has no approval for use in poten-
tially explosive atmospheres.
IMPORTANT
Risk of property damage.
► The device must be connected and put into operation by properly trained
technical personnel.
► Avoid using any forms of force on the device.
► Never expose the device to direct sunlight over an extended period of
time.
► Never immerse the device in water or other liquids.
► Never attempt to repair the device yourself. The device may only be re-
paired by Webtec.
► Never clean the device with substances containing solvents. The device
may only be cleaned in the way described in Section Cleaning.
2.2
Technical Personnel
This Quick Reference Guide is intended for properly trained technical person-
nel who are familiar with the applicable regulations and standards regarding the
area of use.
Technical personnel entrusted with starting up and operating the device must
produce evidence of the necessary qualification. Qualification can be obtained
through participation in a relevant training course or receiving applicable instruc-
tion. Technical personnel must have read and understood the Quick Reference
Guide. Technical personnel must have access to the content of the Quick Refer-
ence Guide at all times.
6
HPM5000QS-MA-MUL-4302 ISSUE 1.0 08/24