Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
A few seconds before recording start, a warning message with a count-down is displayed on the screen; when the count-down
ends the device will change to the programmed channel. To view the scheduled events, press the blue button. To delete a
scheduled event, select the event and press the blue button.
Notes:
•
For recording high definition TV programs, the version of USB device should be 2.0 or above, otherwise the unit may not
record the HD programs correctly.
•
Function of schedule recording is available only when the device is turned on.
•
Compatibility with all USB devices is not guaranteed.
•
With large amounts of data, it may take longer for the system to read the content of a USB device.
TIMESHIFT
This function ensures a continuous background recording of the selected channel.
•
Insert the USB flash drive to USB port of the device and press TIMESHIFT button on the remote. The frame will be paused.
•
Press Play button to start Timeshift (status bar with cutdown will be displayed at the bottom of the screen).
•
Use REV/FWD/Play/Pause buttons on the remote control to control the playback of the recorded video.
•
Press STOP button to remove the status bar from the screen without disabling Timeshift. Press this button again to turn
off the Timeshift.
•
Press INFO button to display timeshift information.
Owner's manual
EN
27
Werbung
Inhaltsverzeichnis
Fehlerbehebung
