Cabletech DVB-T2 URZ0323M Bedienungsanleitung Seite 24

• Select the TV program you want to watch later.
• Press OK button. On the window that pops up, you are able to modify the channel, date and time, as well as optionally
select to repeat this action on a regular basis.
• Select [View] in the [Mode] option.
A few seconds before changing channels, a warning message with a count-down is displayed on the screen; when the count-
down ends the device will change to the programmed channel.
• Sort:
• By LCN: sort the channels according to their logical channel number;
• By Service Name: sort the channels according to their name;
• By Service ID: sort the channels according to the ID;
• By ONID: sort the channels according to the ONID.
• LCN: turn on/off the function.
Picture
• Aspect ratio: select the desired aspect ratio (4:3 LB/ 4:3 PS/ 4:3 Full/ 16:9
Wide screen/ Auto/ 16:9 Pillar Box/ 16:9 Pan&Scan).
• Resolution: select the desired resolution (480p/480i/576i/576p/720p/1080i/
1080p (50 Hz)/1080p (60 Hz)).
• TV format: select color system (PAL/NTSC).
• Video output: select component (RGB) or composite (CVBS) video output
mode.
• 3D Output: adjust 3D settings (Off; Side by side; Auto; Top/Bottom).
• OSD Transparency: adjust OSD transparency (0%/ 20%/ 40%/ 60%/ 80%).
Channel search
• Auto Search: select this function to start automatic searching and saving
EN
available TV channels.
Note: All previously saved channels and settings will be deleted.
• Manual Search: this function enables manual searching for TV channels.
Press direction buttons to select the desired channel frequency. Press OK
button to start searching for the channel. When the channel is found it will
be added to the channel list.
24
Owner's manual