QLOCKTWO MOON Gebrauchsanleitung Seite 47

Operation via the FLASHSETTER app
With the free FLASHSETTER app, the current moon phase can easily be transmitted to MOON 90 | MOON 180
from many smartphones via the light sensor. For more information, visit
www.qlocktwo.com/FLASHSETTER
Additional app function (sleep mode)
Sleep mode can be activated/deactivated using the FLASHSETTER app. When sleep mode is activated, any moon phase
changes (rotation of a prism) will not take place during the night, but will be delayed until the following day.
Manual operation via control button
Switching from transport mode to active mode:
■
Hold down the control button for a very long time (> 13 sec.) until the colour of the LED changes from blue to green.
The prisms will begin rotating to display the current moon phase. The current moon phase is preconfigured on delivery.
Setting the moon phase manually
■
Press the control button once; the LED will turn blue. A prism will rotate to indicate the next moon phase. The next
automatic change of moon phase will begin in approx. 25 hours.
Changing the display format (sphere/shape/eclipse):
■
Hold down the control button until the LED turns blue. The desired display format can now be selected.
Sphere: Press the control button once
Shape: Press the control button twice
Eclipse: Press the control button three times
Switching from active mode to transport mode:
■
Hold down the control button for a very long time (> 13 sec.) until the colour of the LED changes from blue to green.
The prisms will begin rotating to indicate transport mode ('empty side').
Special function (switching from northern to southern hemisphere)
■
Hold down the control button twice in succession, until the LED turns blue each time.
The prisms will rotate to switch from displaying the northern hemisphere to displaying the southern hemisphere (or vice
versa).
IMPORTANT: This selection can only be made immediately after switching from transport mode to active mode!
EN
EN
9 47