Werbung
Verfügbare Sprachen
Verfügbare Sprachen
-
Automatic mode: the fan speed is automatically adjusted according
to the flow temperature read by the NTC probe located on the living
radiator. The algorithm will choose whether to switch off, modulate
or bring the fan to the maximum speed. The display always shows
the current operating status. The correct operation of the product in
this mode is strictly dependent on compliance with the water inlet/
outlet indications (stickers on the product). The probe, in fact, is
positioned close to the water inlet to allow the algorithm to work
efficiently.
In case of malfunction due to the disconnection of the NTC probe the
icon [1] will turn yellow. With this type of error, the automatic mode is
not available, but operation of the living radiator in manual mode is still
possible. In any case, it is recommended to contact the Cordivari service
network.
10. Manufacturer liability
The manufacturer declines any liability for damages to persons and
property caused by:
•
use of the appliance other than intended;
•
non-observance of the user manual instructions;
•
tampering with even just one part of the appliance;
•
use of non-original spare parts.
11. Disposal
At the end of its working life, this appliance must be delivered
to the special collection facilities for recycling, since it is not
a standard domestic waste. In case of replacement, it can be
delivered to your distributor.
This management of the end of the life of a product allows
us to preserve our environment and to limit the use of natural resources.
This symbol, applied on the product, indicates the obligation to deliver
the product at the end of its working life to a special collection facility, in
compliance with Directive 2012/19/UE.
Cod. 1910000000088 - nv00
- 13 -
English
Werbung
