Werbung
Verfügbare Sprachen
Verfügbare Sprachen
usually be corrected at the operator controls.
RECOVERY: Press
RECOVERY: Press
RECOVERY: Press
RECOVERY: Press
error, request management assistance to change the value of the Discharge Eye Loading Error configure
decision.
RECOVERY: Press
RECOVERY: Press
—These errors usually require accessing program data and procedures found in the reference manual.
RECOVERY: Press
the equipment and options. If the message returns, request authorized service.
Miltrac cancelled the loading transfer in progress.
and enter cake data to resume operation.
Miltrac cancelled the discharging transfer in progress.
and enter cake data to resume operation.
After discharging, the photo-eye detected a cake where a cake should not
be or did not detect a cake where one should be.
and enter cake data to resume operation.
The discharge photo-eye detected goods at the discharge end during
loading.
and enter cake data to resume operation. To disable detection of this
An allied transfer was cancelled in progress.
and enter cake data to resume operation.
The discharge photo-eye did not detect the expected cake.
and enter cake data to resume operation.
A circuit board is failed or is missing.
. Request management assistance to verify that configure values match
7
<B>DB;CB04 (#"%0E
—These errors can
Werbung
