Werbung
3
2
Press the folding wrench in the direction of the picture to lock the folding riser.
Note: If the folding wrench is too tight or too loose, please adjust the screw at
"1" appropriately.
1. Open the telescopic adjustment
buckle of the folding riser.
1
2. Insert the telescopic riser in the
direction, adjust the required height,
and tighten the adjustment buckle.
Note: If the adjustment buckle is too
tight or too loose, please adjust the
screw at "3" appropriately.
1
Stand the folding riser up and close it
according to the direction of the picture.
EN-11
After confirming that the quick
release pin is inserted, lift the tie rod
and wrench in the direction of the
picture.
Werbung
