Initial Checks; Power Supply; Nomenclature - Ht Instruments Ht4010 Bedienungsanleitung

3.1. INITIAL CHECKS

The instrument has been checked from a mechanical and electrical
point of view before shipment. Every care has been taken to make
sure that the instrument reaches you in perfect conditions. However,
it's advisable to make a rapid check to detect any damage which
may have occurred in transit. Should this be the case, enter
immediately the usual claims with the carrier. Make sure that all the
accessories listed in § 7.3.1 are contained in the package. In case of
discrepancies contact Your dealer. In case of returning of the tester
please keep to the instructions given in § 8

3.2. POWER SUPPLY

The instrument is battery supplied. One battery 9V type IEC 6F22 is
included in the package. When batteries are low, the symbol "BAT"
appears on the display. Replace them immediately, following the
instructions given in § 7.2. The instrument disposes of the Auto
Power OFF function (not disable) consisting in an automatic
switching off 15 minutes of idleness.
3.3. STORAGE
To guarantee the accuracy of the measurements, after a period of
storage under extreme environmental condition, wait for the
necessary time so that the tester returns to normal measuring
conditions (see § 7.2)

4. NOMENCLATURE

30
HT4010