Warning Instructions; Safety Instructions; Warranty Claims - Exclusion Of Liability; Certificates - Guidelines - Helios Rhs 6+2 Serie Montage- Und Betriebsvorschrift

Installation and Operating Instructions
CHAPTER 1
GENERAL
INFORMATION
m
DANGER
m
WARNING
m
CAUTION
ATTENTION
m
DANGER
Isolator-/main switch RHS 6+2..
INSTALLATION AND OPERATING INSTRUCTIONS
NO. 94 923-001
1.1 Important information
In order to ensure complete and effective operation
and for your own safety, all of the following instructions
should be read carefully and observed. Relevant natio-
nal standards, safety regulations and provisions (e.g.
DIN EN VDE 0113) must be absolutely adhered to and
applied. The operating instructions must be kept for
reference with the unit.

1.2 Warning instructions

The adjacent symbols are safety-relevant warning symbols. All
safety regulations and/or symbols must be absolutely adhered to,
so that any dangerous situation is avoided.
m
DANGER
Indicates dangers which will directly result in death or serious injury if the safety inst-
ruction is not followed.
m
WARNING
Indicates dangers which can result in death or serious injury if the safety instruction
is not followed.
m
CAUTION
Indicates dangers which can result injuries if the safety instruction is not followed.
ATTENTION
Indicates dangers which can result in material damage if the safety instruction is not
followed.

1.3 Safety instructions

Special regulations apply for use, connection and operation; consulta- tion is requi-
red in case of doubt. Further information can be found in
and legal texts.
m With regard to all work, the generally applicable safety at work and accident
prevention regulations must be observed!
• All electrical work and the commissioning must only be carried out by authori-
sed, qualified electricians!
• The provisions DIN VDE 0113 part 1 and IEC/EN 60204-1apply for the safety
and electrical equipment of machines. It is stipulated that the breaking capacity
must be sufficient to interrupt the current of the largest motor when stalled, to-
gether with the sum of operating currents of all other motors and/or loads. The
permissi-ble thermal rated current of the switch must not be exceeded. The area
of application in which the isolator switch is used shall be exclusively at the risk
of the user!
1.4 Warranty claims – Exclusion of liability
If the following statements are not observed,
me applies to liability claims against the manufacturer. The use of accessory parts,
which are not recommended or offered by Helios, is not permitted
damages are not covered by the warranty

1.5 Certificates - Guidelines

f the product is installed correctly and used to its intended purpose, it conforms
I
to all applicable regulations and CE directives at its date of manufacture
our warranty shall cease to apply
.
1
Fig.1
the relevant standards
The sa-
.
Any possible
.
.
EN