safety
instructions
• Please read these instructions
and
retain
for
• The appliance is intended solely for domestic
The appliance is suitable for keeping food.
• Before plugging into a socket, check that the voltage in your home
corresponds
with the voltage printed on the bottom of the appliance.
• Do not use single/multiple
• Always carry out regular checks of the appliance and the power
cord to ensure no damage is evident. Should there be any signs that
the appliance or the power cord is damaged in the slightest degree,
the entire appliance should be returned to the Customer Service
Department.
For your own safety, only use the accessories and spare
parts from the manufacturer
• The appliance must be handled and installed by two or more persons.
• Be careful not to damage the floor when you move the appliance.
• During installation, make sure the appliance does not damage the
power cable.
• Check the appliance is not positioned
• Make sure that there is sufficient
around the appliance.
• Keep the vent outlets of the appliance free.
• Do not damage the refrigerant circuit pipes of the appliance.
• Install the appliance on a firm and stable surface.
• Install the appliance
intended for operation in environments
fall within the following ranges, depending on the climatic class
indicated on the rating label at the back of the appliance. The
appliance may not work properly if it is left for a long time at a
temperature
outside the specified range.
Climatic class
Ambient temperature
SN
From
From
ST
From
From
• Do not store or use petro,
this or other electrical appliances. The fumes can create a fire hazard
or explosion.
16 • English
English
future
use.
adapters or extension cables.
which are suitable for the appliance.
in a dry and well ventilated
IOOC to 320C
160C to 320C
180C to 380C
180C to 430C
ammable liquids or gas in the vicinity of
before operating
use within the home.
near a heat source.
ventilation,
leave a space of 10 cm
area. The appliance
where ambient temperatures
the appliance
is