Green Routing Settings - Audio Vox iGO primo Bedienungsanleitung

•
Manoeuvre restrictions and directional constraints are taken into account when planning a route.
•
Roads are used only if access for taxis is allowed.
•
Private roads, resident-only roads and walkways are excluded from routes.
•
Route Planning Method types:
Button
Gives a quick route if you can travel at or near the speed limit on
all roads. Usually the best selection for fast and normal cars.
Gives a short route to minimise the distance to travel. Usually
practical for pedestrians, cyclists or slow vehicles. Searching for a
short route regardless of the speed, this route type is rarely practical
for normal vehicles.
Gives a quick but fuel efficient route based on the fuel consumption
data given in Green Routing settings (page 79). Travel cost and CO
emission calculations are estimations only. They cannot take eleva-
tions, curves and traffic conditions into account.
Results in a route with fewer turns and no difficult manoeuvres. With
this option, you can make your software to take, for example, the mo-
torway instead of a series of smaller roads or streets.

4.3.5 Green routing settings

These settings determine how Green routes will be calculated. They are also used to display the cost and CO2
emission of routes.
Button
:
Descrip-
tion
Descrip-
tion
89
2