Modecom MC-MSFSO Bedienungsanleitung Seite 2

MC-MSFSO
pvlultirnedia Speakers
Introduction.
MODECOM MC-MSF50 were designed for
those seeking high quality multimedia ex
perience. The set is working in 2.1 system,
which means it has two satellite speaker and
one subwoofer unit. In such system satellite
speakers are responsible for reproduction
of high and mid tones, whereas subwoofer
is dedicated to the deep and powerful low
tones. MC-MSF50's subwoofer
driver. Such a large drive allows to produce
powerful and deep low frequency sounds.
Such system is great solution for multimedia
use, such as computer games or movies
playback. Of course it can handle music with
great quality as well.
All of the speakers are enclosed in cabinets
made of MDF boards that assure perfect
acoustics for each Ofthe speaker.
Toenhance the comfort of use, set is equipped
with volume control and
on the side Ofthe satellte speaker.
Specification.
• Satellite speakers dimensions:
110x105x168 mm
• Subwoofer dimensions:
• Satellite drivers: 3,5"
• Subwoofer driver: 6,5"
• Power RMS:
• Frequency response: 60Hz-20kHz
• Signal input cable length: 150 cm
• Satellite speaker connection cable length:
150 cm
• Power: AC 230V @ 50 Hz - 260mA
• Net weight: 6,25 kg
• Gross weight: 7,3 kg
www.
with 6.5"
tone control knobs
253x237x253 mm
+ 26W
modecom
Package contents.
1. Satellite speakers: 2 pcs
2. Subwoofer: 1 pc
3. Signal cable 2RCA-3.5mm jack: 1 pc.
4. User's manual
Installation
Before you begin the installation make sure
that the main power swltch is in OFF position
and all control knobs are in the maximum
position (rotate it counterclockwise).
1. Place the speakers such that the satellite
speakers are on your right and left side. TO
achieve best stereo effect
lite speakers should form equilateral triangle
(each satellite should be in the same dis-
tance from the listeners ears). Preferably try
to put the speakers in such manner that the
satellite speakers are on the same height as
your ears.
2. Connect the signal cable to the signal in
put (L and R) on the back Of subwoofer and
appropriate output port of your sound source
(for example output of your PC's soundcard).
3. Connect the satellite speaker with control
knobs to the "WIRE CONTROLLER"
at the back of subwoofer.
4. Connect the RCA cable Of the Other satel-
lite to the "OUTPUT" socket
subwoofer.
5. Connect the power plug to the mains
socket.
6. Switch main power switch to ON position.
7. Start playing sound using your connected
sound source.
8. Using the volume knob set up desired vol-
ume level.
9. You can adjust the played sound tones us
ing the Bass and Treble knobs to suit your
personal preferences
. eu
left
listener and satel-
socket
at the back of