Silvercrest SKFS 85 A1 Kurzanleitung Seite 22

˜ Operation
m CAUTION! Risk of injury! Do not touch
the sharp metal parts of the peeling disc
NOTES:
The maximum continuous operating time is
o
approx . 2 minutes . Let the product cool for
5 minutes before switching the product on
again .
Before use: Ensure all parts are correctly
o
assembled .
Before switching on the product: Keep clothes
o
and hair away from the moving parts .
Before removing the lid
o
peeling disc or spin basket
[ 2 ]
complete standstill .
Do not overfill the container
o
The product features a safety switch
o
is only activated once the product is correctly
assembled . The product operates only when all
parts are correctly assembled and the lid
properly closed and locked .
Place the product on a flat and stable surface,
o
away from any heat source .
The product is in off mode once the mains
o
plug is connected to a socket outlet and the
[ 7 ]
knob is set to the 0 position .
[ 9 ]
1 . Before assembly: Ensure the knob
the 0 position .
2 . Place the container
(Fig . B) .
3 . Rotate the container
into place . The marking
container and the marking
the main unit must be aligned with each
[ 6 ]
other (Fig . C) .
4 . Inserting the peeling disc
peeling disc onto the drive shaft
centre of the container
Inserting the spin basket
the cover ring so that it is firmly attached to
11 ] [
the spin basket . Place the spin basket onto the
drive shaft at the centre of the container
[ 5 ]
(Fig . E) .
22 GB/IE
[ 2 ]
: Wait until the
[ 1 ]
comes to a
[ 10 ]
.
4 ] [
which
[ 3 ]
1 ] [
is set to
9 ] [
onto the main unit
4 ] [ [ 6 ]
clockwise until it clicks
4 ] [
on the rear of the
on the rear of
: Insert the
2 ] [
at the
5 ] [
(Fig . D) .
[ 4 ]
: Press down
10 ] [
5 . Place the lid
The marking
must be aligned with the marking
.
Rotate the lid clockwise until the marking
on the rim of the container is aligned with the
marking on the lid (Fig . F) .
6 . Connect the mains plug
7 . Switching on: Turn the knob
the mode . The peeling disc
basket starts rotating .
[ 10 ]
Icon
0
8 . Switching off: Set the knob
is
the 0 position . The peeling disc
basket stops rotating .
10 ] [
9 . Pull the mains plug
10 . Rotate the lid
marking
aligned with the marking
the lid from the container (Fig . F) .
11 . Rotate the container
Remove the container from the main unit
˜ Peeling potatoes
NOTES:
The product does not function if the potatoes
o
are too large . Use potatoes which have the
recommended size . Alternatively, cut the
potatoes into smaller pieces .
Recommended potato size:
o
Shape
Oval
Spherical
4 ] [
The peeling disc
o
recesses or irregularly shaped potatoes .
Remove any remaining roots or skin from
recesses by hand using a small knife .
onto the container
1 ] [ 4 ] [
on the rim of the container
to a socket outlet .
[ 7 ]
to select
9 ] [
or the spin
[ 2 ]
Mode
Peeling potatoes
Spinning vegetables
Off
to
9 ] [
or the spin
2 ] [
out of the socket outlet .
[ 7 ]
counter-clockwise until the
[ 1 ]
on the rim of the container
on the lid . Remove
counter-clockwise .
[ 4 ]
Size
80 mm x 60 mm
Ø 75 mm
cannot remove skin from
[ 2 ]
.
on the lid .
is
4 ] [
.
6 ] [