AKASO V50 ELITE Bedienungsanleitung Seite 21

EN
Controlling Your V50 Elite with Your Voice
This camera allows you to capture photos and videos with a single voice command
in any of the 8 supported languages. To control the camera with your voice, you
need to enable the voice control feature on the remote. To take advantage of the
voice control feature, make sure to keep the remote's microphone within 10
centimeters of your mouth and speak clearly in a quiet environment. This will help
ensure optimal results. Please follow the instructions below to use the voice
control feature.
1. Make sure the camera is connected to the remote first. To do this, turn on the
camera, and activate the remote by pressing any of its buttons. The camera will
be automatically connected to the remote.
2. Press the voice control button on the remote to turn on the voice control
feature. The blue indicator light will remain lit when the remote is in Voice
Control mode.
3. Issue voice commands (see list below) to the remote's microphone. The blue
indicator light will flash after the voice command was issued.
4. To turn off the voice control feature, simply press the Voice Control button. The
blue indicator light will black out.
Tips:
1. Voice Control performance might vary with distance, environmental noise, and
wind. Ensure the camera is kept clean and clear of debris.
2. Stop video recording before giving a new command.
3. The remote will remain active while in Voice Control mode. You can still press
any of the remote's buttons.
4. The voice control feature will be disabled when the camera powers off.
5. If the voice control feature is disabled, the remote will automatically deactivate
after 3 minutes of inactivity with no voice commands issued.
18