STEINEL Professional Multisensor True Presence BT IPD Bedienungsanleitung Seite 50

Start-up: LED flashes blue rapidly for 30 seconds.
Initialisation: LED lights up blue continuously.
Normal operation: LED off.
Identification: LED flashes blue slowly.
Firmware update: LED flashes cyan rapidly.
Error: LED flashes red rapidly.
Initial operation with the Steinel Connect app
The sensor is configured via the Steinel Connect app. The
corresponding network keys are stored on the smartphone
or tablet when the sensor and Steinel Connect app are
connected for the first time. The keys prevent unauthorised
access to the sensor.
The network key must be shared for access via another
smartphone or tablet.
True Presence
New New
• Set the range via the Steinel Connect app.
App! App!
Initial operation of the True Presence
During initial operation, the multisensor creates an image
of the room.
During this process, the room must be free of movement
for 2 to 2.5 minutes.
The process is complete when the blue LED goes out.
BT IPD detection setting
®
– 50 –
BT IPD
®
Contents