Emerson E12 Produkthandbuch Seite 9

Data sheet
Sheet No.: A1.103.200 Rev. B
Date: May 2011
standard available
insert shapes
sq Max.
Optional available
insert shapes
D Max.
D Max.
Standard inserts with inner-square-dimensions per actuator type
E25 E40 / E65 E100
0.433 0.551 0.748
0.354 0.394 0.472
0.394 0.472 0.551
0.63
Maximum insert dimensions
M1 1.36 1.36 1.36
M2 - - 1.06
P1 0.71 0.71 0.91
P2 - - 0.99
Sq max. 0.630 0.630 0.748
D max. 0.827 0.827 0.929
www.El-O-matic.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
insert mounting
acc. isO 5211
Ø P2
Ø P1
M1 M2
E150 E200 E350 E600
0.866 0.866 1.063 1.063
Optional insert dimensions
0.551 0.551 0.551 0.551
0.630 0.630 0.630 0.630
0.669 0.669 0.669 0.669
0.748 0.748 0.748 0.748
0.945 0.945 0.866 0.866
1.063 1.063 0.945 0.945
1.97 1.97 1.97 2.05
1.46 1.46 1.46 -
1.26 1.26 1.26 1.44
1.43 1.43 1.43 -
1.063 1.063 1.063 1.063
1.323 1.323 1.323 1.323
DrivE insErts fOr El-O-Matic actuatOrs
Description
Most of the El-O-Matic actuators are fitted with drive inserts. This enables actuators to be
directly mounted onto suitable valves and eliminates the need for a bracket and coupling type
mounting kit. The use of direct mounts significantly cuts the cost of the valve/actuator assembly.
Standard actuators are fitted with square drive inserts in accordance with ISO 5211 (or DIN
3337), but a wide variety of other inserts are also available. Special inserts may have oversize or
undersize squares, double-D and shaft key way forms.
Drive inserts can be supplied on factory built actuators or as loose items and are easily
replaceable at distributor or end user level.
Where direct mounts are not possible, for instance on valves with exposed grand packing, the
use of inserts often simplifies the design of the mounting kit.
Material :
Finish :
The following actuator types do not have inserts.
- E12,
- P2500 and P4000
- 180° actuators
These actuators have inner square directly in the bottom of the pinion. See the following data
sheets for more information :
E950 E1600
1.417 1.811
E12 ISO5211
P2500/P4000 ISO 5211
180° ISO 5211
0.866
2.52 3.23
- -
1.91 2.38
- -
1.417 1.811
1.772 2.362
Aluminum alloy
Anodized
A1.103.102
A1.103.106
A1.203.011
E