Emerson E12 Produkthandbuch Seite 15

Data sheet
Sheet No.: A1.101.70 Rev. C
Date: June 2010
Silicone
MVQ 70
Sealings
Materials
Part Material
Housing Aluminum Alloy
Aluminum Alloy
Drive Shaft Steel (180° rotation)
Stainless Steel
Piston
Aluminum Alloy
Sealings Silicone MVQ 70 O-rings
Grease Castrol Optitemp TT1
Top : Delrin
Shaft bearings
Bottom : Nylatron
Piston bearings PTFE
PTFE ("P" serie)
Bodybearings
Nylatron ("E" serie)
Shaft thrust washer ZEDEX 100 K
Stainless Steel ("E" serie)
End cap bolts
Alloy Steel ("P" serie)
Springs Carbon Spring Steel
www.El-O-matic.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
LOW TEMPERATURE ACTUATOR SPECIFICATIONS
Castrol Optitemp TT1
Low Temperature
Grease
Specifications
UNS A13600, ASTM B85
UNS 1 77075, ASTM 7075 T6
ETG100 or 42CrMo4V XM
Sandvic 1802, SS2382 or X35CrM017
UNS A03560, ASTM B26
-/-
-/-
POM
PA6.6 + MoS2
25% Carbon filled
25% Carbon filled
PA6.6 + MoS2
-/-
AISI 304 A2
8.8 DIN 912
UNS G10860, ASTM A228
Description
A double piston, rack and pinion pneumatic actuator incorporating a three point piston support
system, anti-blowout spindle and with high duty synthetic bearings at all bearing points.
This version is a standard aluminum actuator, but incorporating parts and materials suitable for
low temperature operation.
Note
When operating actuators in sub-zero temperatures (< 0°C or < 32°F) care should be taken to
counter the effects of freezing condensate inside the actuator.
Specification
Max. pressure : 120 psi (8 bar)
Torque : Standard
Media : Air or non corrosive gas
Temperature : -40°F to +176°F (-40°C to +80°C)
Finish : Polyester non-TGIC based powder coating (see data sheet A4.204.01)
Spare parts
Dedicated low temperature spare parts are available for maintenance or make a standard
actuator suiteable for low temperature operation.
Remark
Hard anodized
Zinc Plated type > P750
type > E950
Deltatone ® coating
Deltatone ® coating
-40°C / +80°C
-40°F / +176°F