Emerson E12 Produkthandbuch Seite 16

Data sheet
Sheet No.: A1.101.71 Rev. B
Date: January 2010
Viton
FPM
Sealings
Materials
Part Material
Housing Aluminum Alloy
Aluminum Alloy
Drive Shaft Steel (180° rotation)
Stainless Steel
Piston
Aluminum Alloy
Sealings Viton FPM O-rings
Grease Castrol LMX
Top : Delrin
Shaft bearings
Bottom : Nylatron
Piston bearings PTFE
PTFE ("P" serie)
Bodybearings
Nylatron ("E" serie)
Shaft thrust washer ZEDEX 100 K
Stainless Steel ("E" serie)
End cap bolts
Alloy Steel ("P" serie)
Springs Carbon Spring Steel
www.El-O-matic.com
Copyright © Emerson Process Management. The information in this document is subject to change without notice.
Updated data sheets can be obtained from our website www.El-O-Matic.com or from your nearest Valve Automation Center USA: +1 813 319 0266 Europe: +31 74 256 10 10 Asia-Pacific: +65 6501 4600
HIGH TEMPERATURE ACTUATOR SPECIFICATIONS
Castrol
LMX
Grease
Specifications
UNS A13600, ASTM B85
UNS 1 77075, ASTM 7075 T6
ETG100 or 42CrMo4V XM
Sandvic 1802, SS2382 or X35CrM017
UNS A03560, ASTM B26
-/-
-/-
POM
PA6.6 + MoS2
25% Carbon filled
25% Carbon filled
PA6.6 + MoS2
-/-
AISI 304 A2
8.8 DIN 912
UNS G10860, ASTM A228
Description
A double piston, rack and pinion pneumatic actuator incorporating a three point piston support
system, anti-blowout spindle and with high duty synthetic bearings at all bearing points.
This version is a standard aluminum actuator, but incorporating parts and materials suitable for
high temperature operation.
Specification
Max. pressure : 8 bar ~ 120psi
Torque : Standard
Media : Air or non corrosive gas
Temperature : -4°F to +248°F (-20°C to +120°C)
Finish : Polyester non-TGIC based powder coating (see data sheet A4.204.01)
Spare parts
Dedicated high temperature spare parts are available for maintenance or make a standard
actuator suiteable for high temperature operation.
Remark
Hard anodized
Zinc Plated type > P750
type > E950
Deltatone coating
®
Deltatone coating
®
-20°C / +120°C
-4°F / +248°F