Contact; Disposal - Pce Instruments Pce-Ct 80Hp Bedienungsanleitung

5.3.5 USB communication (only possible with optional software)
The meter can be connected to a PC for communication via the micro USB 2.0 connector. To do
so, first install the software and the USB driver for the meter. Then connect the meter to your
computer by using the USB cable. If the connection has been successful, you will see the
at the bottom of the display. You can now organise, format, print or copy the measured data on
your PC.
5.3.6 System reset
To reset the meter to its factory default settings, follow these steps:
5. Press to turn off the meter.
6. Press and hold
7. Release the
8. To reset the meter, confirm with
restart automatically.
6

Contact

If you have any questions, suggestions or technical problems, please do not hesitate to contact
us. You will find the relevant contact information at the end of this user manual.
7

Disposal

For the disposal of batteries in the EU, the 2006/66/EC directive of the European Parliament
applies. Due to the contained pollutants, batteries must not be disposed of as household waste.
They must be given to collection points designed for that purpose.
In order to comply with the EU directive 2012/19/EU we take our devices back. We either re-use
them or give them to a recycling company which disposes of the devices in line with law.
For countries outside the EU, batteries and devices should be disposed of in accordance with
your local waste regulations.
If you have any questions, please contact PCE Instruments.
while turning on the meter with
key when the dialogue box for the system reset is displayed.
or cancel the procedure with
© PCE Instruments
24
.
. The meter will
icon