Functions Of The Remote Control - Skandika Fitness SF-1740 Bedienungsanleitung

DEVICE AND CONTROLS
"Touch" button
This button switches between the automatic and manual programs. The device will start to operate
after a 5-second countdown. During operation, pressing this button will stop the machine.
The device will automatically switch to sleep mode if it is not being used for 30 seconds.
Warm up: Low intensity exercise
One loop for 5 minutes = 300 seconds means each of the 60 grids will last for 5 seconds.
Beginner: Medium intensity exercise
Vitality: High intensity exercise
P: Automatic program. Device will control the exercise intensity.
M: Manual mode. Users can adjust the intensity.

Functions of the remote control

A. Starts the device (Quickstart / Program Mode)
B. Stops the device
C. Switches between the modes "Warm up" / "Beginner" / "Vitality"
D. Increase speed
E. Decrease speed
F. Increase time
G. Decrease time
H. Quick adjust button for 4 km/h
I. Quick adjust button for 9 km/h
Attention
The maximum range for transmitting signals via remote control is 2.5 meters. Align remote controller
with the signal receiver of the device.
14