Bresser Meteo Champ HD Bedienungsanleitung Seite 65

NOTE:
- If no display appears on the LCD after you plug the adaptor, press [ RESET ] key by using a pointed object.
- The backup battery can backup the time & date.
- Please always remove the back-up battery if the device is not going to be used for a while. Please keep in
mind that even when the device is not in use, certain settings, such as the clock, alert settings and records in
its memory, will still drain the back-up battery.
3. Flip out the antenna on the back
5.5.2 SETUP DISPLAY CONSOLE
When setup the display console for the first time, user need to enter basic selection.
NOTE
If no display appears when power up the console, you can press [RESET] key by using a pointed object.
6. DISPLAY CONSOLE FUNCTIONS AND OPERATION
6.1 INITIAL DISPLAY SCREEN
Once the console display pairs up with the 7-in-1 sensor array and thermo-hygrometer sensor, all the weather
information will be shown on the display, as shown below:
Manual_7003510-7803510-7903510_MeteoChamp-7in1_en-de_BRESSER_v072024a.indb 65 Manual_7003510-7803510-7903510_MeteoChamp-7in1_en-de_BRESSER_v072024a.indb 65
65
04.07.2024 10:51:35 04.07.2024 10:51:35