Vankyo Performance V700G Benutzerhandbuch Seite 7

•
11.Settings: Press to open the settings dashboard.
•
12. Navigation: Use to move the cursor on the screen.
•
13. Live Guide (TV): Press to enter the live guide page.
•
14. Home: Press to return to the homepage.
•
15. Volume +/-: Adjust the volume up or down.
•
16. Projector Setting (Shortcut): Access the projector settings shortcut menu.
Note: Please insert 2 AAA batteries (not included) into the remote control before use.
Quick Start Guide
Projector Installation
You can install your projector in four different configurations, depending on your room setup:
•
Front Desktop: Place the projector on a table in front of the screen.
•
Rear Ceiling: Mount the projector on the ceiling behind the screen (requires a rear projection
screen).
•
Rear Desktop: Place the projector behind the screen on a flat surface (requires a rear
projection screen).
•
Front Ceiling: Mount the projector on the ceiling in front of the screen.
Note:
•
After installation, go to Homepage > Settings (⚙) > Projection to select the appropriate
projection mode. This ensures the images are displayed correctly based on your setup.
•
The projector requires a 1/4" mounting screw, which is not included.
Power On/Off
To power the projector on or off, follow these steps:
•
Remove the lens cover to ensure the projector lens is unobstructed.
•
Connect the power adapter to the projector and plug it into a wall outlet.
•
Press the Power button located on the projector or remote to turn the device on or off.
7