Vankyo Performance V700 Pro Benutzerhandbuch Seite 7

Quick Start Guide
Projector Installation
You can install your projector in four different configurations, depending on your room setup:
•
Front Desktop: Place the projector on a table in front of the screen.
•
Rear Ceiling: Mount the projector on the ceiling behind the screen (requires a rear projection
screen).
•
Rear Desktop: Place the projector behind the screen on a flat surface (requires a rear
projection screen).
•
Front Ceiling: Mount the projector on the ceiling in front of the screen.
Note:
•
After installation, go to Homepage > Settings (⚙) > Projection to select the appropriate
projection mode. This ensures the images are displayed correctly based on your setup.
•
The projector requires a 1/4" mounting screw, which is not included.
Power On/Off
To power the projector on or off, follow these steps:
•
Remove the lens cover to ensure the projector lens is unobstructed.
•
Connect the power adapter to the projector and plug it into a wall outlet.
•
Press the Power button located on the projector or remote to turn the device on or off.
Setup Wizard
When you first turn on the projector, you will be guided through a setup wizard. Follow the prompts
to:
•
Select your preferred language.
•
Set up a Wi-Fi connection.
•
Access the projector's main homepage.
This will prepare your projector for use and ensure that all necessary settings are configured.
7