CABLE MANAGEMENT
01
Before you begin routing your cables,
detach the magnetic cable sheaths from
both the upper and bottom arms.
03
Slot the loose cables under both arms into
their respective magnetic cable sheaths and
attach them to the base of each arm.
02
Fully connect your cables from your power source or
computer through the cable channel on the bottom
arms to your monitor.
Note: Leave some slack in the cables to ensure that your monitor
rotates without any obstruction.
04
For cables routed from the top monitor arm(s), continue
routing them along the back of the vertical stand.
Attach the magnetic cable sheath (L) to the back of
the vertical stand to secure your cables in place.
Secretlab MAGNUS Vertical Monitor Stand
5