Vulpes Goods MAX Handbuch Seite 6

User GUiDe
Upon receiving the anti-brak device, it is important to fully charge it
using the USB-C port for optimal use.
1. We recommend turning on the device first without your dog
nearby. This is to prevent startling your dog.
2. Turn on your device using the slider on the left side. Then, press
one of the four buttons. If the green light briefly illuminates, it means
it is functioning properly. If this indicator is red, please charge your
device.
3. Dog behavior can be corrected using sound. Dogs generally
respond best to ultrasonic sound. We recommend starting with
the sound mode, and if this proves ineffective, switch to normal
ultrasonic mode. If this also proves ineffective, switch to strong
ultrasonic + flashlight mode.
4. When your dog barks or displays unwanted behavior, point
the device at your dog and say "Stop!" or "Quiet!" then press
the ultrasonic button once. The LED light will turn green, and you
will hear a short beep. If you hold the button down, the beep will
become continuous.
5. If you press the ultrasonic button once, the ultrasonic sound will
be emitted. Holding the button down increases the intensity of
the sound. Holding the button for an extended period will result in
continuous emission of ultrasonic sound. The ultrasonic sound will
stop after 9 seconds.
6. For the flashlight function, hold the flashlight button for 3 seconds
to activate the flashlight. Press again for the flashing light option.
Press once more to turn off the flashlight.
7. If the indicator light is red, it means the device is low on battery
and needs charging.
6
COPYRIGHT @ ALL RIGHTS RESERVED BY VULPES GOODS®