Vulpes Goods MAX Handbuch Seite 5

Charging Port + Lanyard Attachment
Charge the device with the included charging cable, and attach the
provided lanyard to the device.
Flashlight
Hold the flashlight button for 3 seconds to activate the flashlight.
Press again for the flashing light option. Press once more to turn off
the flashlight.
Ultrasonic sound
The device beeps when you click the sound button. It will continue
beeping for an extended period if you keep the sound button
pressed. (It automatically switches off after 9 seconds)
Sound
The device beeps with a click of the sound button. The pen
continues beeping for an extended period if you keep the sound
button pressed.
Strong ultrasonic sound + Flashlight
The ultrasonic sound and flashing light. As long as you keep the
button pressed, the ultrasonic sound will be emitted, and the
flashlight will continue to flash. We also recommend not holding the
button for more than 8 seconds after pressing the flashlight button.
(It automatically switches off after 9 seconds - range of 10 meters).
Led indicator
The indicator light is lit when you press any of the buttons or when a
function is activated.
2-Frequency/ Lock Switch
Slide the button downward to lock the device. Slide the button to the
middle for variable-frequency (25kHz-30kHz) ultrasonic mode, and
upward for fixed-frequency (25kHz) ultrasonic mode.
Flashlight
The flashlight will be activated when the correct mode is selected.
Speaker
The speaker emits both the beep sound and the ultrasonic sound.
5
COPYRIGHT @ ALL RIGHTS RESERVED BY VULPES GOODS®