Route Editing; Changing The Route Search Conditions - Sony NVX-HC1 Bedienungsanleitung

Tips
• or lights up in close-up view when
approaching the point to turn right or left.
• To cancel the close-up view, press (BACK) on the
card remote commander or (CUSTOM) on the main
unit.
A Arrow guidance/Route line
B Distance to turn
C Current car position
D Visualised distance to turn
E Facility information such as service area/
petrol station/parking area,
Distance to the next facility
Upper: The nearest facility except parking
area
Middle: The 2nd nearest facility
Lower: The nearest facility
F Area name
G The vertical width of the window indicates
the approximate distance as follows:
Standard scale map: 600 m (0.4 mile)/Zoom
scale map: 300 m (0.2 mile)
Notes
• Four cardinal points are shown only in English when
displaying the location and address information by
latitude and longitude.
• After the current car position is off the route, the
arrow guidance on the display disappears during
rerouting.
• Arrow guidance " M" continues to appear when the
distance to the next turning point is over 5 km (3
miles) for general roads and 10 km (6 miles) for
motorways.
Tips
• "Unknown" appears when the road/street name is
unknown.
• " " appears at the transfer point when using
ferries, and trains as well.
• If the characters are too many to display, the end of
a line is abbreviated as "..." and skip the rest.
• Travel time is displayed up to "99h59m."
• Travel distance is displayed up to "9999km" (When
"km" is selected as the distance unit).

Route editing

The settings for searching for routes or
waypoints on a route can be configured in
various ways.
The following contents are featured.
• Changing the route search condition to find
other routes
• Setting route priority
• Editing waypoints
• Checking route information
• Searching for a route again
• Deleting the destination when malfunction
occurs
• Route simulation
Changing the route search
conditions
When you want to change the route while
driving, change the search condition and search
for the route again.
1
Press (MENU).
2
Select "Edit Route" by <, , and
(ENTER).
3
Select "Search Condition" by pressing
M or m, then press (ENTER).
A
A Route1: Time-priority route
B Route2: Time-priority route (Alternative)
C Route3: Distance-priority route
4
Select the desired route by <, , and
(ENTER).
The route search starts, then the route
guidance starts.
Note
Use the search result as a rough guide, it may be
different in practice.
B C
15