Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Quicklinks
Vega 650 Handbook
ENGLISH
General Safety Instructions:
READ SAFETY INSTRUCTIONS
Servicing:
These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are permitted
to carry out repairs.
Critical Components:
These products are not authorised for use as critical components in nuclear control systems, life support systems or
equipment for use in hazardous environments without the express written approval of the Managing Director of TDK-
Lambda EMEA.
Product Usage:
These products are designed for use within a host equipment which restricts access to authorised competent
personnel.
This product is a component power supply and is only to be installed by qualified persons within other equipment and
must not be operated as a stand alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is a component power supply and does not fall within the scope of the EMC directive. Compliance with
the EMC directive must be considered in the final installation. Please contact your local TDK-Lambda office.
Environmental:
These products are IPX0, and therefore chemicals/solvents, cleaning agents and other liquids must not be used.
Environment:
This power supply is a switch mode power supply for use in applications within a Pollution Degree 2, overvoltage
category II environment. Material Group IIIb PCB's are used within it.
Output Loading:
The output power taken from the power supply must not exceed the rating stated on the power supply label, except
as stated in the product limitations in this handbook.
Input Parameters:
This product must be operated within the input parameters stated in the product limitations in this handbook.
End of Life Disposal:
The unit contains components that require special disposal. Make sure that the unit is properly disposed of at the
end of its service life and in accordance with local regulations.
This product is a component power supply and is only to be installed by qualified persons within other equipment and
must not be operated as a stand alone product.
This product is for sale to business to business customers and can be obtained via distribution channels.
It is not intended for sale to end users.
This product is a component power supply and does not fall within the scope of the EMC directive. Compliance with
the EMC directive must be considered in the final installation. Please contact your local TDK-Lambda office
RISK OF ELECTRIC SHOCK
High Voltage Warning:
Dangerous voltages are present within the power supply. The professional installer must protect service personnel
from inadvertent contact with these dangerous voltages in the end equipment.
Page 1 of 35
17137 issue 37, Sept 2019
Werbung
Verwandte Anleitungen für TDK-Lambda Sept 2019
Inhaltszusammenfassung für TDK-Lambda Sept 2019
- Seite 1 General Safety Instructions: READ SAFETY INSTRUCTIONS Servicing: These products are not customer serviceable. TDK-Lambda UK LTD. and their authorised agents only are permitted to carry out repairs. Critical Components: These products are not authorised for use as critical components in nuclear control systems, life support systems or equipment for use in hazardous environments without the express written approval of the Managing Director of TDK- Lambda EMEA.
- Seite 2 An internal fuse protects the unit and must not be replaced by the user. In case of internal defect, the unit must be returned to TDK-Lambda UK LTD or one of their authorised agents. The mains switch, where fitted, must not be used as the main disconnect device.
- Seite 3 Allgemeine Sicherheitsvorschriften: LESEN SIE DIE SICHERHEITSVORSCHRIFTEN Wartung: Diese Produkte können nicht durch den Kunden gewartet werden. Nur TDK-Lambda UK LTD. und deren zugelassene Vertriebshändler sind zur Durchführung von Reparaturen berechtigt. Kritische Komponenten: Diese Produkte sind nicht für die Verwendung als kritische Komponenten in nuklearen Kontrollsystemen, Lebenserhaltungssystemen oder Geräten in gefährlichen Umgebungen geeignet, sofern dies nicht ausdrücklich und...
- Seite 4 Produkt auf Erdschluss geprüft werden. Eine interne Sicherung schützt das Gerät und darf durch den Benutzer nicht ausgetauscht werden. Im Fall von internen Defekten muss das Gerät an TDK-Lambda UK LTD oder einen der autorisierten Vertriebshändler zurückgeschickt werden. Der Schalter, sofern vorhanden, ist ein unipolares Gerät, das nicht als Hauptschalter zum Trennen des Gerätes verwendet werden darf.
- Seite 5 Consignes générales de sécurité: LIRE LES CONSIGNES DE SECURITE Entretien: Ces produits ne peuvent pas être réparés par l’utilisateur. Seuls, TDK-Lambda UK LTD et ses agents agréés sont autorisés à effectuer des réparations. Composants critiques: Ces produits ne doivent pas être utilisés en tant que composants critiques dans des systèmes de commande nucléaire, dans des systèmes de sauvetage ou dans des équipements utilisés dans des environnements dangereux,...
- Seite 6 Un fusible interne protège le module et ne doit pas être remplacé par l'utilisateur. En cas de défaut interne, le module doit être renvoyé à TDK-Lambda UK LTD ou l'un de ses agents agréés. Le commutateur, s'il est installé, est un commutateur unipolaire et il ne doit pas être utilisé comme coupe-circuit principal.
- Seite 7 Manutenzione: Il cliente non può eseguire alcuna manutenzione su questi prodotti. L'esecuzione delle eventuali riparazioni è consentita solo a TDK-Lambda UK LTD e ai suoi agenti autorizzati. Componenti critici: Non si autorizza l'uso di questi prodotti come componenti critici all'interno di sistemi di controllo nucleari, sistemi necessari alla sopravvivenza o apparecchiature destinate all'impiego in ambienti pericolosi, senza l'esplicita approvazione scritta dell'Amministratore Delegato di TDK-Lambda EMEA.
- Seite 8 Un fusibile interno protegge l'unità e non deve essere sostituito dall'utente. Nell'eventualità di un difetto interno, restituire l'unità a TDK-Lambda UK LTD o a uno dei suoi agenti autorizzati. L'interruttore, se fornito, è un dispositivo unipolare e non deve essere utilizzato come dispositivo principale di scollegamento.
- Seite 9 Instrucciones generales de seguridad: LEA LAS INSTRUCCIONES DE SEGURIDAD Servicio: Estos productos no pueden ser reparados por los clientes. TDK-Lambda UK LTD. y sus agentes autorizados son los únicos que pueden llevar a cabo las reparaciones. Componentes fundamentales: Estos productos no pueden ser utilizados como componentes fundamentales en sistemas de control nuclear, sistemas de soporte vital o equipos a utilizar en entornos peligrosos sin el consentimiento expreso por escrito del Director General de TDK-Lambda EMEA.
- Seite 10 Un fusible interno protege la unidad y este no debe ser nunca reemplazado por el usuario. En caso de existir algún defecto interno, la unidad debe ser enviada a TDK-Lambda UK LTD o a uno de sus agentes autorizados. El interruptor, de estar montado, es un dispositivo monopolar y no debe ser utilizado como dispositivo de desconexión principal.
- Seite 11 Instruções gerais de segurança: LEIA AS INSTRUÇÕES DE SEGURANÇA Manutenção: Estes produtos não são podem ser submetidos a manutenção por parte do cliente. Apenas a TDK-Lambda UK LTD e os seus agentes autorizados têm permissão para realizar reparações. Componentes essenciais: Não é...
- Seite 12 Existe um fusível interno que protege a unidade e que não deve ser substituído pelo utilizador. Em caso de defeito interno, a unidade deve ser devolvida à TDK-Lambda UK LTD ou a um dos seus agentes autorizados. O interruptor, quando instalado, é um dispositivo de pólo simples, não devendo ser utilizado como o dispositivo de desactivação principal.
- Seite 13 Altitude -200m to 5000m*. -200m to 5000m. Pressure 54kPa to 106kPa. 54kPa to 106kPa Horizontal with chassis lowest, on either side or vertical Orientation with the airflow upwards.** Material Group IIIb Page 13 of 35 17137 issue 37, Sept 2019...
- Seite 14 Note: All output voltages/variants may not be available as standard units, refer to datasheet for standard product range. These (and other variants) may be available as non-standard or custom units, please contact our sales team for details. Page 14 of 35 17137 issue 37, Sept 2019...
- Seite 15 @ may optionally be followed by the letter L or H, where L and H indicate the low or high output voltage variants of the module. For W2, W5 & W8 modules only: @ is followed by F, T, E or S Page 15 of 35 17137 issue 37, Sept 2019...
- Seite 16 1 = Inhibit, fixed current limit 2 = Inhibit, programmable current limit 3 = Enable, fixed current limit 4 = Enable, programmable current limit Page 16 of 35 17137 issue 37, Sept 2019...
- Seite 17 15A/9A H1L/3 1.8-3.8/9.1-16.2V 12A/6A 46W/98W 12/18 15A/9A H1H/3 3.9-5.5/9.1-16.2V 12A/6A 66W/98W 12/18 15A/7.5A H1L/4 1.8-3.8/16.3-25V 12A/4.5A 46W/113W 12/18 15A/6A H1H/4 3.9-5.5/16.3-25V 12A/4.5A 66W/113W 12/18 15A/6A H2/1L 5.6-9/1.8-3.8V 10A/8A 90W/31W 20/8 15A/12A Page 17 of 35 17137 issue 37, Sept 2019...
- Seite 18 D2 in slots 2/3 is limited to 40A The D2 module is limited to 8V when a digital secondary option is fitted. PSUs fitted with a W2 module are limited to a maximum ambient of 45°C. Page 18 of 35 17137 issue 37, Sept 2019...
- Seite 19 When the IEC inlet option is fitted (option I) together with a plastic fan grill then the end face of the PSU with the fan grill may be operator accessible. Page 19 of 35 17137 issue 37, Sept 2019...
- Seite 20 & xFW Primary option transformers L1, L2, XT601 Choke winding L4, T2 Choke winding Various All other choke & transformer windings RLY1 Relay X capacitor Various All other X and electrolytic capacitors Page 20 of 35 17137 issue 37, Sept 2019...
- Seite 21 Model: NS-LAM/V6RFS 3.3F1SV5 12/12H3/3S W5FSV3 W8FSV8 (K60184*) where * may be any number of letters and/or numbers indicating non-safety related differences. Input: 100-240Vac nom. May also have 120-350Vdc. Maximum output power: As standard model Orientation: As standard model Cooling: Reverse air. Page 21 of 35 17137 issue 37, Sept 2019...
- Seite 22 Add all the module turns x amps together and this must not exceed the ampere turns • If necessary reduce the loading until the conditions are met, ie. power and ampere-turns maxima. Page 22 of 35 17137 issue 37, Sept 2019...
- Seite 23 Outputs OFF Enable Outputs ON Outputs ON Logic 0 = 0-0.8V Logic 1 = 2-5V with respect to 0V (Pin 3) Secondary Options Remote Sense Option Single Output Module “N” Option: Page 23 of 35 17137 issue 37, Sept 2019...
- Seite 24 Vega 650 Handbook Inhibit Internally is a 390Ω resistor in series with a diode of an optocoupler. Drive ≥2mA to inhibit module(max 13mA). Module Good TWIN Output Module “N” Option Page 24 of 35 17137 issue 37, Sept 2019...
- Seite 25 Vega 650 Handbook TWIN Output Module “R” Option Single Output Module Digital Option Single Output Wide Range Programmable Option Page 25 of 35 17137 issue 37, Sept 2019...
- Seite 26 Vega 650 Handbook LAYOUT FOR VEGA 650 CONVERTER Page 26 of 35 17137 issue 37, Sept 2019...
- Seite 27 Vega 650 Handbook LAYOUT OF VEGA TWIN MODULE LAYOUT OF VEGA H5/4 MODULE Page 27 of 35 17137 issue 37, Sept 2019...
- Seite 28 Vega 650 Handbook LAYOUT OF VEGA SINGLE MODULE LAYOUT OF VEGA DUAL WIDTH MODULE Page 28 of 35 17137 issue 37, Sept 2019...
- Seite 29 Vega 650 Handbook LAYOUT OF VEGA SINGLE MODULE HIGH CURRENT LAYOUT OF VEGA W5 MODULE Page 29 of 35 17137 issue 37, Sept 2019...
- Seite 30 Vega 650 Handbook LAYOUT OF VEGA W8 MODULE LAYOUT OF VEGA W9 MODULE Page 30 of 35 17137 issue 37, Sept 2019...
- Seite 31 Vega 650 Handbook LAYOUT OF VEGA OR-ING MODULE LAYOUT OF VEGA 100mA PRIMARY OPTION Page 31 of 35 17137 issue 37, Sept 2019...
- Seite 32 Vega 650 Handbook LAYOUT OF VEGA 300mA PRIMARY OPTION LAYOUT OF VEGA 1A PRIMARY OPTION Page 32 of 35 17137 issue 37, Sept 2019...
- Seite 33 Vega 650 Handbook LAYOUT OF VEGA PRIMARY MICRO OPTION Customer Fixings Customer Air and Fixing Detail Page 33 of 35 17137 issue 37, Sept 2019...
- Seite 34 Vega 650 Handbook IEC 60320 (Switched) Input Quick Connect (Faston) Input Page 34 of 35 17137 issue 37, Sept 2019...
- Seite 35 Module Positions TDK-Lambda UK Ltd Kingsley Avenue, Ilfracombe Devon, EX34 8ES Telephone - Sales and Service +44 (0)1271 856666 Head Office and Works +44 (0)1271 856600 Facsimile +44 (0)1271 864894 WEBSITE: www.uk.tdk-lambda.com Page 35 of 35 17137 issue 37, Sept 2019...