Battery Change
4. Remove the discharged batteries.
5. If needed put in 4 new Mignon (AA) Batteries. Pay attention to the correct
polarity which is shown in the battery compartment.
6. Close the cap by screwing it down.
7. The product can now be used at any time.
functions
1. Briefly press the button (A) next to the cable at the multifunctional controller
for max. 2 seconds to turn on the device.
2. Briefly press the button (A) again for max. 2 seconds to switch through the
8 different lighting effects.
3. Pressing the Button (A) for a minimum of 5 seconds will switch off the device.
4. To turn the device back on and switch through the lighting effects again, you
have to repeat step 1. and 2. of this manual. The product doesn't save the last used
effect.
31