Herunterladen Diese Seite drucken

Prolux GOJAK 7016 Originalbetriebsanleitung Seite 10

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10
English
Maintenance
The repair of a GoJak may only be carried out by qualified persons and is subject to the manufacturer's
decision! If there is any doubt about the proper condition of the GoJak, it must be taken out of service for
inspection by an expert.
Furthermore, do not use the product in the event of
- Breakage, deformation, sharp nicks or cracks of any kind
- Signs of high heat exposure (e.g. black colouring)
- Wear and excessive corrosion
Periodic inspections
Carry out a visual inspection before each use to detect any damage.
Damaged GoJaks must not be used.
Warranty
The warranty is void if the product is used improperly and if the instructions in this operating instructions are
not observed.
Further warranty provisions can be found in the General Terms and Conditions of ProLux Systemtechnik GmbH
& Co. KG.
Declaration of Conformity with EC requirements
Within the meaning of the EC Machine Directive 2006/42/EG
Annex II A
We hereby declare that the machine/equipment designated below is designed and built in
the version sold by us in such a way as to comply with the relevant fundamental safety and
health criteria of the applicable EC Directive(s). This declaration shall cease to be valid if
alterations are made to the machine/equipment without our prior agreement.
Item no.:
Item:
Load capacity:
Relevant EC Directives:
Harmonized standards:
National standards and technical
specifications applied, in particular:
ProLux Systemtechnik GmbH & Co. KG
Blaustein, 07.03.2017
______________________________________
i.A. Manuel Jungbauer
Authorized person for documentation
ProLux Systemtechnik
GmbH & Co. KG
Am Schinderwasen 7
D-89134 Blaustein
410075
GOJAK 7016, Speed up to 10 km/h
782 kg
EC Machine Directive 2006/42/EG
DIN EN 1494:2009-05 "Mobile or movable jacks and associated
lifting equipment; German version"
DIN EN ISO 12100-1/2 "Safety of machinery - General principles
for design - Risk assessment and risk reduction"
DIN EN ISO 14121 "Safety of machinery - Risk assessment"
Tel.: +49 (0)7304/9695-0
Fax: +49 (0)7304/9695-40
E-Mail: info@prolux.de
Website: www.prolux.de
WEEE-Reg.Nr.: DE56189565
Original operating instruction - GOJAK 7016
Stand: 07.06.2024
Version: 02

Werbung

loading

Diese Anleitung auch für:

410075